Hp Officejet J5740 All-in-One Printer User Manual download pdf (Page 78)

NOTE: The settings you specify here are only saved on the HP All-in-One. They do

not adjust the settings in the software. You can save your most frequently used

settings by using the software that you installed with the HP All-in-One.

Make a 10 x 15 cm (4 x 6 inch) borderless copy of a photo

For the best quality when copying a photo, load photo paper in the input tray and change

your copy settings for the correct paper type and photo enhancement. You might also

want to use the photo print cartridge for superior print quality. With the tri-color and photo

print cartridges installed, you have a six-ink system.

To make a borderless copy of a photo from the control panel

1. Load 10 x 15 cm (4 x 6 inch) photo paper in the input tray.

2. Load your original photo print side down on the right front corner of the glass.

Position the photo on the glass so the long edge of the photo is along the front edge

of the glass, as indicated by the engraved guides along the edge of the glass.

3. Press Start Copy Black or Start Copy Color.

The HP All-in-One makes a 10 x 15 cm (4 x 6 inch) borderless copy of your original

photo.

NOTE: If you loaded tabbed paper in the photo tray, you can remove the tab

from the copy of your photo once the ink has completely dried.

TIP: If the output is not borderless set the paper type to Premium Photo, and

then try making the copy again.

No comments

Hp Officejet J5740 All-in-One Printer User Manual Page 78