Hp Officejet J5740 All-in-One Printer User Manual download pdf (Page 215)

to the port labeled 1-LINE on the back of the HP All-in-One and to your telephone

wall jack, as shown below.

1 Telephone wall jack

2 Use the phone cord supplied in the box with the HP All-in-One

This special 2-wire phone cord is different from the more common 4-wire phone cords

you might already have in your office. Check the end of the cord and compare it to

the two types of cords shown below.

If you used a 4-wire phone cord, disconnect it, find the supplied 2-wire phone cord,

and then connect the 2-wire phone cord to the port labeled 1-LINE on the back of the

HP All-in-One.

If the HP All-in-One came with a 2-wire phone cord adaptor, you can use it with a 4-

wire phone cord, in case the supplied 2-wire phone cord is too short. Attach the 2-

wire phone cord adaptor to the port labeled 1-LINE on the back of the HP All-in-One.

Attach your 4-wire phone cord to the open port on the adaptor and to the telephone

wall jack. For more information on using the 2-wire phone cord adaptor, see the

documentation that came with it.

For more information on setting up the HP All-in-One, see the printed documentation

that came with the HP All-in-One.

Cause: You are using a phone line splitter between the 1-LINE port on the HP All-

in-One and the wall.

Solution: A phone line splitter can affect the sound quality of your phone line and

cause static. (A splitter is a two-cord connector that plugs into a telephone wall jack.)

Fax troubleshooting 213

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 285 286

No comments

Hp Officejet J5740 All-in-One Printer User Manual Page 215