Hp Officejet J5740 All-in-One Printer User Manual Page 142

  • Download
  • Add to my manuals
  • Print
  • Page
    / 286
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 141
Solution: Adjust the lightness and darkness of the copies.
To adjust the copy contrast from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass or print
side up in the document feeder tray.
If you use the document feeder tray, place the pages so that the top edge of the
document goes in first.
3. In the Copy area, press Menu repeatedly until Lighter / Darker appears.
4. Do one of the following:
•Press
to darken the copy.
•Press
to lighten the copy.
5. Press Start Copy Black or Start Copy Color.
Cause: The Paper Type setting is incorrect.
Solution: Change the Paper Type setting to match the type of paper loaded in the
input tray.
To set the paper type for copies
1. In the Copy area, press Menu repeatedly until Paper Type appears.
2. Press
until the appropriate paper type appears.
3. Press Start Copy Black or Start Copy Color.
To set the paper type for printing
1. Make sure you have paper loaded in the input tray.
2. On the File menu in your software application, click Print.
3. Make sure the HP All-in-One is the selected printer.
4. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called
Properties, Options, Printer Setup, Printer, or Preferences.
5. Click the Paper/Quality tab.
6. In the Type is list, click the type of paper loaded in the input tray.
Cause: Copying a poor-quality picture, such as a newspaper photo, causes bands,
checks, or stripes to appear on your copy. These are called moiré patterns.
Solution: To reduce moiré patterns, try placing one or more clear plastic sheet
protectors directly on the glass, and then place the original print side down on top of
the sheet protectors.
Cause: Debris might be stuck on the glass or on the back of the document lid; this
causes poor copy quality and slows down processing.
Chapter 12
140 Troubleshooting
Page view 141
1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 285 286

Comments to this Manuals

No comments