Hp Officejet J5740 All-in-One Printer User Manual download pdf (Page 76)

Set the number of copies

You can set the number of copies that you want to print by using the Number of

Copies option.

To set the number of copies from the control panel

1. Make sure you have paper loaded in the input tray.

2. Load your original print side down on the right front corner of the glass or print side

up in the document feeder tray.

If you use the document feeder tray, place the pages so that the top edge of the

document goes in first.

3. In the Copy area, press Menu repeatedly until Number of Copies appears.

4. Press

or use the keypad to enter the number of copies, up to the maximum.

(The maximum number of copies varies by model.)

TIP: If you hold down either of the arrow buttons, the number of copies changes

by increments of 5 to make it easier to set a large number of copies.

5. Press Start Copy Black or Start Copy Color.

Set the copy paper size

You can set the paper size on the HP All-in-One. The paper size you select should match

what is loaded in your input tray.

To set the paper size from the control panel

1. In the Copy area, press Menu repeatedly until Copy Paper Size appears.

2. Press

until the appropriate paper size appears.

3. Press Start Copy Black or Start Copy Color.

Set the copy paper type

You can set the paper type on the HP All-in-One.

To set the paper type for copies

1. In the Copy area, press Menu repeatedly until Paper Type appears.

2. Press

until the appropriate paper type appears.

3. Press Start Copy Black or Start Copy Color.

Refer to the following table to determine which paper type setting to choose based on the

paper loaded in the input tray.

Paper type Control panel setting

Copier paper or letterhead Plain Paper

HP Bright White Paper Plain Paper

HP Premium Plus Photo Paper, Glossy Premium Photo

Chapter 8

74 Use the copy features

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 285 286

No comments

Hp Officejet J5740 All-in-One Printer User Manual Page 76