Hp LaserJet 3055 User Manual Page 47

  • Download
  • Add to my manuals
  • Print
  • Page
    / 430
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 46
Labels
For the HP LaserJet 3050/3052/3055 all-in-one, HP recommends that you print labels from the
priority input slot. For the HP LaserJet 3390/3392 all-in-one, HP recommends that you print labels
from the single-sheet priority input slot (tray 1) and use the straight-through output path. See
Loading
media into the input trays for more information.
CAUTION Do not feed a sheet of labels through the all-in-one more than once. The
adhesive degrades and might damage the all-in-one.
Label construction
When selecting labels, consider the quality of the following components:
Adhesives: The adhesive material should be stable at 200°C (392°F), the maximum fuser
temperature.
Arrangement: Only use labels with no exposed backing between them. Labels can peel off
sheets that have spaces between the labels, causing serious jams.
Curl: Before printing, labels must lie flat with no more than 13 mm (0.5 inch) of curl in any
direction.
Condition: Do not use labels with wrinkles, bubbles, or other indications of separation.
Transparencies
Transparencies must be able to withstand 200°C (392°F), the all-in-one maximum fuser temperature.
CAUTION You can print transparencies from a 250-sheet tray (tray 1 on the HP LaserJet
3050/3052/3055 all-in-one; tray 2 or optional tray 3 on the HP LaserJet 3390/3392 all-in-one).
However, do not load more than 75 transparencies at one time into the tray.
ENWW Guidelines for using media 29
Page view 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 429 430

Comments to this Manuals

No comments