Hp LaserJet 3055 User Manual Page 297

  • Download
  • Add to my manuals
  • Print
  • Page
    / 430
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 296
Paper handling
Use the HP ToolboxFX paper-handling options to configure your default settings. These are the
same options that are available on the Paper Handling and Printing menus on the control-panel.
For more information, see
Using the all-in-one control panel.
You must set the asset number. The asset number is not set at the factory. This number is stored in
the all-in-one for identification purposes.
Three options are available for handling print jobs when the product is out of media:
Select Wait for paper to be loaded.
Select Cancel from the Paper out action drop-down list to cancel the print job.
Select Override from the Paper out time drop-down list to send the print job to another paper
tray.
The Paper out time field specifies how long the all-in-one waits before acting on your selections.
You can specify from 0 to 3600 seconds.
NOTE You must click Apply before your changes take effect.
Print quality
Use the HP ToolboxFX print-quality options to improve the appearance of your print jobs. These are
the same options that are available on the Print Quality menu on the control panel. For more
information, see
Using the all-in-one control panel.
The four options provided for controlling print quality are resolution, REt (Resolution Enhancement
technology), print density, and Economode.
Resolution. Select 600 resolution for average print jobs and Fast Res 1200 for higher-quality
print jobs. Select ProRes 1200 for the highest-quality print job, but a longer printing time.
REt. You can turn on REt, which HP provides for improved print quality.
Print density. For increased print density, select a higher number. For decreased print density,
select a lower number.
Economode. Turn Economode on when you are printing average print jobs. Economode
reduces print quality, but increases the life of your print cartridge. To increase print quality, turn
Economode off. HP does not recommend full-time use of Economode.
NOTE You must click Apply before your changes take effect.
Paper types
Use these HP ToolboxFX Paper types options to configure print modes that correspond to the
various media types. When you select Restore Modes, all of the modes are reset to the factory
settings.
NOTE You must click Apply before your changes take effect.
ENWW HP ToolboxFX 279
Page view 296
1 2 ... 292 293 294 295 296 297 298 299 300 301 302 ... 429 430

Comments to this Manuals

No comments