HP ZBook 15 G5 Base Model Mobile Workstation User Manual download pdf (Page 142)

I/O devices

NOTE:

● Make sure external devices are supported and compliant (i.e., USB Type C, Thunderbolt 3, PCI Express,

etc).

● If you have problems with external devices not provided by HP, contact device manufacturers for

compatibility and latest drivers prior to troubleshooting (i.e., USB devices, Thunderbolt devices, PCI

Express Card reader, VGA/Display/HDMI monitors, Speakers, etc).

● Be sure I/O devices are properly inserted into the I/O ports, and then be sure the I/O devices are

recognized by Windows Device Manager.

Keyboard

Items Procedures

Symptoms

Keystrokes not recognized

Characters not matched

Possible causes

Dust trapped under keycap, loose keycap, loose keyboard connection, defective keyboard.

Troubleshooting steps

1. Inspect the keyboard for any signs of dust, liquid, or debris trapped under sticky keys

that might prevent keystroke recognition.

2. Check for incomplete connection between keyboard and system board by verifying that

caps lock or num lock light turns on when key is pressed.

3. Verify whether the keyboard is recognized in Windows Device Manager and verify

whether the keyboard driver is installed properly.

4. Test with a working external keyboard (i.e., USB keyboard).

Also test in Windows for special keys (Caps Lock, Shift, Ctrl, Fn, Windows, Alt) if

necessary.

5. Test with HP PC Hardware Diagnostics (UEFI) to isolate a hardware issue from a

software issue.

6. Verify that BIOS is up to date. If so, resetting BIOS to default may help.

7. Test with veried working operating system or restore operating system to be sure that

the issue is not caused by dierent language settings, sticky keys feature, etc.

8. Verify that keyboard ex cables are fully inserted and in good condition.

The sections below are intended for authorized service providers/technicians.

1. Verify if keyboard ex cable is in good condition (no delamination or torn cable end, no

missing or cracked tracks, pads).

2. Verify keyboard ex cable ends are fully inserted and aligned with connectors on

system board, and those connector tabs are properly closed. Reseat cables.

3. Replace new internal keyboard and retest.

Tips and tricks A key only works when pressed with force. Inspect and remove debris trapped under keycap.

130 Chapter 7 Troubleshooting guide

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 202 203

No comments

HP ZBook 15 G5 Base Model Mobile Workstation User Manual Page 142