HP 9600 Series User Manual download pdf (Page 49)

4-16 ENWW

Printing on various media types

For Windows

1 Load the print media (see “Loading media in the input tray”).

2 Open the printer driver (see “Printing a document”).

3 Click the Paper/Quality tab.

4 Select the media type from the Type is drop-down list.

5 Select the media size from the Size is drop-down list.

6 Select the paper source from the Source is drop-down list.

7 Change any other desired print settings and click OK.

8 Print your document.

For Macintosh

1 Load the print media (see “Loading media in the input tray”).

2 Click File, and then click Page Setup.

3 Select the media size.

4 Click File, and then click Print.

5 Mac OS 9.1.x and 9.2.x: In the General panel, select the paper source from the

Paper Source drop-down list.

6 Open the Paper Type/Quality panel.

7 Mac OS 9.1.x and 9.2.x: Select the media group from the Category drop-down list and

media type from the Paper Type drop-down list.

Mac OS X (10.1 and later): Click the Paper tab and select the media type and source.

8 Change any other desired print settings and click OK or Print.

 Use HP media for optimum print quality. These media types are specifically designed to

work with your printer. See “HP supplies and accessories” for part numbers and ordering

information.

 If you are printing transparencies, it is recommended to remove each transparency as it

prints and set it aside to dry.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 122 123

No comments

HP 9600 Series User Manual Page 49