HP EliteDesk 880 G2 Base Model Tower PC User Manual download pdf (Page 64)

Processor

Description

Intel Core i7-6700 processor

Intel Core i5-6600 processor

Intel Core i5-6500 processor

1. Prepare the computer for disassembly (Preparation for disassembly on page 18).

2. Remove the access panel (Access panel on page 19).

3. Remove the fan sink (Fan sink on page 53).

4. Rotate the locking lever to its full open position (1).

5. Raise and rotate the microprocessor retainer to its fully open position (2).

6. Lift the processor (3) straight up and remove it.

CAUTION: Do NOT handle the pins in the processor socket. These pins are very fragile and handling

them could cause irreparable damage. Once pins are damaged it may be necessary to replace the

system board.

The heat sink must be installed within 24 hours of installing the processor to prevent damage to the

processor’s solder connections.

Reverse the removal procedure to install a new processor.

NOTE: After installing a new processor onto the system board, update the system ROM to ensure that the

latest version of the BIOS is being used on the computer. The latest system BIOS can be found on the Web at:

http://h18000.www1.hp.com/support/les.

54 Chapter 4 Removal and replacement procedures – Microtower (MT) chassis

1 ... 63 64 65 ... 156

No comments

HP EliteDesk 880 G2 Base Model Tower PC User Manual Page 64