HP rp2450 Manual download pdf (Page 85)

Chapter

Server Slide Rail Installation

Step 6. Locate and install the inner slides on the sides of the server, using M4 x 0.7mm machine screws.

The inner rails contain a flat spring latch. The free end of the latch goes toward the front of the

server, the riveted end goes toward the rear of the server chassis.

Step 7. Double-check all mounting screws to ensure that they are tight.

Step 8. Completely extend both outer slides to the front of the rack. Outer slides should latch in the

extended position.

Step 9. Align the inner rails on the server between the extended outer rails on the rack.

WARNING The rp24xx server weights 22.68 kg (50 lbs). Use two people or a lift during

installation. Take necessary precautions to prevent muscle strain when

lifting or carrying the server.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 201 202

No comments

HP rp2450 Manual Page 85