HP rp2450 Manual download pdf (Page 191)

Chapter

Memory DIMM Removal

275

Memory DIMM Removal

Memory DIMMs reside in eight sockets (two sets of four sockets each) located on the right side of the System

Board. They are normally loaded in DIMM pairs of equal size.

CAUTION Ensure that the system is shut down and power removed from the server before attempting

removal or replacement of a component.

To remove a memory DIMM, perform the following steps:

Step 1. Press down on the extractor levers on each end of the selected memory DIMM to unseat the DIMM

from its socket.

Step 2. When the DIMM is unseated, pull it up and out of the System Board.

The following picture shows a memory DIMM located on the right side (from the server front) of the server

system board.

The next graphic is a drawing of a generic memory DIMM, followed by drawings that show DIMM

removal/replacement.

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 201 202

No comments

HP rp2450 Manual Page 191