HP rp2450 Manual download pdf (Page 195)

Chapter

Guardian Service Processor (GSP) Removal

287

Guardian Service Processor (GSP) Removal

The GSP card resides on the System Board at the rear left center, under the short PCI I/O card (slot 1), which

must be removed for access.

Before removing the GSP from the server, perform the following steps:

CAUTION Ensure that the system is shut down and power removed from the server before attempting

removal or replacement of a component.

To remove the GSP from the server, perform the following steps:

Step 1. Loosen the four mounting screws that hold the GSP card in place.

Step 2. Grasp the card by the left and right edges, rock it gently to free it from its socket on the System

Board, and lift it out of the server.

The following picture shows the a GSP installed in a server.

The following graphic shows the location of a GSP in the server.

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 201 202

No comments

HP rp2450 Manual Page 195