HP rp2450 Manual download pdf (Page 139)

Chapter

Secure Web Console I/O Card Replacement

147

CAUTION For system security, initial configuration must be completed before making the serial

connection between the SWC card and the server’s console port.

Failure to follow this precaution can result in root level access being available to any

level of SWC user.

Step 3. Connect the server’s console to the SWC card via the RS 232 Serial port.

Step 4. Perform Initial Configuration of the SWC card.

a. Ensure that no other devices (printers, etc.) are connected on the same local subnet by

disconnecting the LAN cable from the SWC and using the Ping command as follows:

C:\ ping 192.0.0.192

It will time out.

b. At a command line prompt, enter the following:

C:\route add 192.0.0.192 xx.xx.xx.xx.xx

Where xx.xx.xx.xx.xx is the IP address of your PC or Unix workstation.

c. Reconnect the LAN cable to the SWC card and use a PC or Unix Workstation and a web

browser. Verify that you can access the SWC at its default IP address using the Ping command

as follows:

C:\ping 192.0.0.192

It will indicate connection with the SWC card at IP 192.0.0.192

Step 5. Create the first SWC administrator account.

RS 232 Serial Port

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 201 202

No comments

HP rp2450 Manual Page 139