HP rp2450 Manual download pdf (Page 119)

Chapter

Add Peripheral Component Interconnect (PCI) Cards

127

Add Peripheral Component Interconnect (PCI) Cards

rp24xx servers have a total of 4 PCI I/O slots. Slot 1 is short slot, located outside the I/O card cage, connected

to the back of the I/O Backplane. Slots 2 through 4 are located inside the I/O card cage. Slots 1 and 2 are Twin

Turbo slots; slots 3 and 4 are Turbo slots.

• Slots 1 and 2 are Twin Turbo slots. Each Twin Turbo slot has a dedicated PCI bus and supports 32 and

64-bit PCI cards.

• Slots 3 and 4 are Turbo slots. They share a single PCI bus and support 32 and 64-bit PCI cards.

A400 servers have access to slots 1 and 2 only. A500 servers have access to all four slots. The following graphic

shows the PCI slots on the rear of the server, right side.

No. Name No. Name

1 I/O Card Cage 6 I/O Card anchor screws

2 Outside I/O Card anchor screw 7 I/O Cards #2 through #4

3 Short I/O Card #1 (may be Secure Web Console) 8 I/O Backplane anchor screw

4 I/O Card Cage anchor quarter-turn fasteners 9 I/O Backplane

5 I/O Backplane disconnect lever

ccrr005

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 201 202

No comments

HP rp2450 Manual Page 119