HP rp2450 Manual download pdf (Page 58)

Chapter

Racked Server Site Requirements

Cabinet Minimum Service Access Requirements

*Minimum distance required to fully open rear access door.

Non-HP Cabinet Installation Requirements

rp24xx servers can be installed in cabinets other than those manufactured by HP. Refer to the installation

instructions of the cabinet in which you wish to install the server.

WARNING Do not install a server in any cabinet without anchoring it to the cabinet with four

screws (two on each side) that attach to the front posts of the cabinet. Screws are

used as a safeguard against accidental ejection in case a cabinet tips forward. rp24xx

servers installed in all HP cabinets are secured with captive screws.

HP will NOT support servers that are not secured to the cabinet with screws.

Failure to heed this warning could result in serious personal injury or damage to the

server.

C2787A Field

Integrated

2.0m x 19”

Cabinet

41 20 61 x 91.4 x 203.2 24 x 36 x 80

Access

Location

*Rear 61 cm (24 in.)

Sides 30 cm (12 in.)(When extended)

Front 101 cm (40 in.)

Cabinet

Product

Number

Description EIA

Max.

Servers

External Dimensions

(width x depth x height)

Centimeters Inches

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 201 202

No comments

HP rp2450 Manual Page 58