Common Commands
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 933
show running-config
Use the show running-config command to display a text print of all the non-default parameters contained
in the current running configuration file. Use the verbose keyword to display a text print of the entire
configuration (including parameters in their default state). Specific portions of the running-config may be
displayed, based on the command entered.
Variations of this command include the following:
show running-config
show running-config access-lists
show running-config access-lists verbose
show running-config checksum
show running-config interface
<interface>
show running-config interface
<interface>
verbose
show running-config interface vlan
<vlan id>
show running-config interface vlan
<vlan id>
verbose
show running-config policy-class
show running-config policy-class verbose
show running-config qos-map
show running-config qos-map verbose
show running-config verbose
Syntax Description
access-lists Displays the current running configuration for all configured IP access lists.
interface <interface> Displays the current running configuration for a particular interface. Type the
show running-config interface ? command to display a list of valid interfaces.
policy-class Displays the current running configuration for all configured policy classes.
qos-map Displays the current running configuration for all configured QoS maps.
verbose Displays the entire running configuration to the terminal screen (versus only the
*Optionalnon-default values).
checksum Displays the encrypted Message Digest 5 (md5) version of the running
*Optionalconfiguration.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Comments to this Manuals