HP 7000 dl Router Series User's Guide download pdf (Page 187)

SROS Command Line Interface Reference Guide Enable Mode Command Set

show spanning-tree <bridgegroup#>

Use the show spanning-tree command to display the status of the spanning-tree protocol.

Syntax Description

<bridgegroup#> Optional.

Display spanning-tree for a specific bridge group.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is an example output using the

show spanning-tree

#show spanning-tree

Spanning Tree enabled protocol ieee

Root ID Priority 32768

Address 00:a0:c8:00:88:41

We are the root of the spanning tree

Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec

Bridge ID Priority 32768

Address 00:a0:c8:00:88:41

Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec

Aging Time 300

-------------------

-------------------

-------------------

-------------

---------------

eth 0/2 Desg FWD 19 128.2 P2p

HP 7000 dl Router Series User's Guide Page 187