HP 7000 dl Router Series User's Guide download pdf (Page 476)

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

Use the snmp trap command to enable all supported Simple Network Management Protocol (SNMP)

traps on the interface.

Syntax Description

No subcommands.

Default Values

By default, all interfaces (except virtual Frame Relay interfaces and sub-interfaces) have SNMP traps

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet, VLAN, DDS (dds 1/1), serial (ser 1/1), virtual

Frame Relay (fr 1), and SHDSL (shdsl 1/1) interfaces.

Usage Examples

The following example enables SNMP capability on the Ethernet interface:

(config)#interface eth 0/1

(config-eth 0/1)#snmp trap

HP 7000 dl Router Series User's Guide Page 476