HP 7000 dl Router Series User's Guide download pdf (Page 182)

100

101

SROS Command Line Interface Reference Guide Enable Mode Command Set

show queue [atm <interface id> | frame-relay <interface id> | ppp

<interface id>]

Use the show queue command to display conversation information associated with an interface queue.

This command shows summary and per-conversation information.

Syntax Description

<interface id> Specifies the numerical virtual Frame Relay interface or PPP identifying label.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is a sample output from the show queue command:

>enable

#show queue fr 1

Queueing method: weighted fair

Output queue: 18/25/200/64/1027 (size/highest/max total/threshold/drops)

Conversations 2/4/256 (active/max active/max total)

(depth/weight/highest/discards) 12/256/33/0

Conversation 10, linktype: ip, length: 67

source: 10.100.23.11, destination: 10.200.2.125, id: 0x0000, ttl: 47,

TOS: 0 prot: 17 (udp), source port 99, destination port 99

(depth/weight/highest/discards) 6/256/25/0

Conversation 23, linktype: ip, length: 258

source: 10.100.23.11, destination: 10.200.2.125, id: 0x0000, ttl: 47,

TOS: 0 prot: 6 (tcp), source port 16, destination port 16

1 ... 181 182 183 ... 941

Comments to this Manuals

No comments

HP 7000 dl Router Series User's Guide Page 182

Comments to this Manuals

Related products and manuals for Networking HP 7000 dl Router Series