HP 7000 dl Router Series User's Guide download pdf (Page 287)

100

101

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

ip ftp source-interface <interface>

Use the ip ftp source-interface command to use the specified interface’s IP address as the source IP

address for FTP traffic transmitted by the unit. Use the no form of this command if you do not wish to

override the normal source IP address.

Syntax Description

<interface> Enter the interface to be used as the source IP address for FTP traffic.

Type ip ftp source- interface? for a complete list of valid interfaces.

Default Values

No default value is necessary for this command.

Command Modes

(config)# Global Configuration Mode required

Functional Notes

This command allows you to override the sender field in the IP packet. If you have multiple interfaces in

your unit, changing the sender tells the receiver where to send replies. This functionality can also be used

to allow packets to get through firewalls that would normally block the flow.

Usage Examples

configures the unit to use the loopback 1 interface as the source IP for FTP traffic:

(config)#ip ftp source-interface loopback 1

1 ... 286 287 288 ... 941

Comments to this Manuals

No comments

HP 7000 dl Router Series User's Guide Page 287

Comments to this Manuals

Related products and manuals for Networking HP 7000 dl Router Series