HP 7000 dl Router Series User's Guide download pdf (Page 904)

Router (OSPF) Configuration Command Set

area <area id> default-cost <value>

Use this command to assign a cost of the default summary route sent into a stub area or not-so-stubby-area

(NSSA). Use the no form of this command to delete the assigned cost.

Syntax Description

<area id> Identifier for this area. Enter as an integer (range: 0-4294967295) or an IP

address <A.B.C.D>.

<value> Default summary route cost. Range: 0-166777214.

Default Values

<area id> No default.

Command Modes

(config-ospf)# Router (OSPF) Configuration Mode required

Usage Examples

The following example defines a default cost of 85 to a specific area:

(config)#router ospf

(config-ospf)#area 192.22.72.0 default-cost 85

HP 7000 dl Router Series User's Guide Page 904