HP 7000 dl Router Series User's Guide download pdf (Page 76)

100

101

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug ip /jointfilesconvert/63229/bgp [events | in | out | keepalives | updates]

Use the debug ip /jointfilesconvert/63229/bgp command to activate debug messages associated with IP BGP. Debug messages are

displayed (real time) on the terminal (or Telnet) screen. Use the no form of this command to disable the

debug messages.

Syntax Description

events Displays significant BGP events such as a neighbor state change.

in/out Displays the same information as debug ip /jointfilesconvert/63229/bgp, but limits messages to the

specified direction (in or out).

keepalives Displays BGP keepalive packets.

updates Displays BGP updates for all neighbors.

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

# Enable Command Mode

Functional Notes

If no arguments are given, the debug ip /jointfilesconvert/63229/bgp command displays general BGP events such as

sent/received message summaries, route processing actions, and results. Keepalive packets are not

debugged with this command.

Usage Examples

The following example enables debug messages on general outbound BGP messages and events:

#debug ip /jointfilesconvert/63229/bgp out

#07:42:39: BGP OUT 10.15.240.1[2]: Transmitting msg, type=UPDATE (2), len=142

1 ... 75 76 77 ... 941

Comments to this Manuals

No comments

HP 7000 dl Router Series User's Guide Page 76

Comments to this Manuals

Related products and manuals for Networking HP 7000 dl Router Series