Hp Officejet J5740 All-in-One Printer User Manual download pdf (Page 229)

Cause: The "Phone Cord Connected to Correct Port on Fax" test failed.

Solution: Plug the phone cord into the correct port.

What to do

1. Using the phone cord supplied in the box with the HP All-in-One, connect one end

to your telephone wall jack, then connect the other end to the port labeled 1-LINE

on the back of the HP All-in-One.

NOTE: If you use the 2-EXT port to connect to the telephone wall jack, you

will not be able to send or receive faxes. The 2-EXT port should only be used

to connect other equipment, such as an answering machine or a telephone.

1 Telephone wall jack

2 Use the phone cord supplied in the box with the HP All-in-One

2. After you have connected the phone cord to the port labeled 1-LINE, run the fax

test again to make sure it passes and the HP All-in-One is ready for faxing.

3. Try to send or receive a test fax.

Cause: The "Using Correct Type of Phone Cord with Fax" test failed.

Solution:

• Make sure you used the phone cord supplied in the box with the HP All-in-One to

connect to the telephone wall jack. One end of the phone cord should be

Fax troubleshooting 227

1 2 ... 224 225 226 227 228 229 230 231 232 233 234 ... 295 296

No comments

Hp Officejet J5740 All-in-One Printer User Manual Page 229