HP 72SI User Manual download pdf (Page 36)

2-6 Front Page

◆ Status — displays system parameters and the status of all

user-configurable options. Press the  and  keys to scroll

between pages. To change an option, go to the Printer Con-

figuration section of the menu.

◆ Print Mode — sets print quality mode. See “Selecting a Print

Mode” on page 3-4 for instructions.

◆ Advance Media — press the ) key to advance the media for-

ward. When you press and hold the ) key, the media moves

faster. Press the , key to reverse the media back onto the

supply spool. When you press and hold the , key, the media

moves faster. You can also press the Media Advance rocker

switch, mounted on the OHS near the postheater, to move

the media in either direction.

◆ Menu — displays the complete printer menu for access to

advanced configuration options (see “Menu” on page 2-9

for instructions).

◆ AutoJet — detects deflected and non-firing jets, and substi-

tutes working jets for them (in Production and Quality

modes).

◆ Prime Bars — fires all jets by drawing a set of lines called

prime bars. This is a good way to inspect and prepare the

jets for printing after they have been idle (see “Print Prime

Bars” on page 3-8). You can also print a similar pattern

called Print Jet-Out Lines, which shows which jets have been

detected and replaced by AutoJet (see page 2-14 for details).

Fig. 2-4. Status page 1

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 167 168

No comments

HP 72SI User Manual Page 36