HP 72SI User Manual download pdf (Page 70)

3-22 Loading Roll-Fed Media

! key to continue. See “Media Wizard” on page 3-44

for information about these settings.

◆ If you press !, the control panel displays the prompt:

Advance media to takeup?

15. To advance the media, press

"(Yes), otherwise press (

(No) and go to the next step.

◆ If you press

"(Yes), the media advances to the takeup

spool. You can press Stop if necessary to stop the media

advance at any time.

◆ If you press

( (No), go to step 18.

16. Grasp the middle of the media web, pull straight back, route

the media underneath the takeup core, and tape it to the

takeup core as shown in Fig. 3-7 on page 3-19.

If necessary, you can use the arrow keys on the control panel

screen to move the media forward or backward.

Note

With the fixed collets securely pinned to the supply

and takeup spools (see Fig. 3-4), position the media

on the takeup core in the same relative position as it

is wound on the supply core. For example, if the

media is positioned 0.125 inches from the left end of

the supply core, it should be positioned the same dis-

tance from the left end of the takeup core. If neces-

sary, the 3-inch collets on the takeup spool can be

loosened so that the core can be moved to the right

or left.

17. Press the

! key to continue.

The printer tensions the supply and takeup system, turns on

the platen vacuum fans, and measures the width of the

media by locating the right and left edges with the digital

image sensor (camera) on the printhead carriage.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 167 168

No comments

HP 72SI User Manual Page 70