HP 72SI User Manual download pdf (Page 95)

Setting Heater Temperatures 3-47

Setting Heater

Temperatures

The are three heaters: a preheater, a platen heater, and post-

heater. The postheater’s top and bottom zones can be set to dif-

ferent temperatures. Optionally, the postheater can be turned

off.

The heater temperatures can be set during the media load pro-

cess (see “Loading Roll-Fed Media” on page 3-16), from the

Media Wizard (see “Media Wizard” on page 3-44), or from the

menu (see the following procedure).

1. From the control panel Front Page screen, press the



(Menu) key.

2. Press the

) key repeatedly to highlight Printer Settings.

3. Press the  (Menu In) key.

4. Press the

) key repeatedly to highlight Heater Temps

Setting.

5. Press the  (Menu In) key.

The control panel displays a list of heater settings, num-

bered from 0 to 10 and “Custom.”

6. Press the

, or ) keys repeatedly to select a setting.

As you scroll through the settings, the temperature settings

for each zone are shown at the bottom of the screen.

7. Press

! to select a setting, or  to cancel.

◆ If you selected Custom, a list of heaters appears so you

can change the settings for each of the heater zones.

◆ If you selected any other setting, go to step 9.

8. Select a heater zone and set a new temperature.

If a Media Wizard type is currently loaded, the control panel

asks whether to save the new setting in the Media Wizard for

the currently loaded media.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 167 168

No comments

HP 72SI User Manual Page 95