HP 72SI User Manual download pdf (Page 44)

2-14 Menu

◆ Idle Spits — when the printer is idle, it automatically spits a

small amount of ink into the service station to keep the ink-

jets open and working. To reduce the amount of ink con-

sumed during idle spitting, you can set the operation to

Medium or Low. To ensure that the printheads are always at

maximum readiness, use the High setting.

◆ Low Ink Warning — defines the amount of ink remaining in

the ink box supply at which the printer will display a “low

ink” message on the control panel.

◆ Printer Name — displays a keypad to change the printer

name displayed on the control panel and RIP or ColorSpan

Print Server. Alternatively, the printer name can be changed

from the ColorSpan Print Server.

◆ Restore All Defaults — restores all Printer Configuration set-

tings to their factory default values, and zeroes all registra-

tion data. After running this option, all calibration values

must be reestablished by running AutoSet or manual calibra-

tions.

Maintenance ◆ Access Printheads — moves the printhead carriage out from

the service station to the capping station. This is the same

functionality as the Access Heads button on the Front Page.

◆ Purge A Color — purges the four printheads of a single color,

rather than all sixteen printheads. This is helpful when recov-

ering stubborn jet-outs.

◆ Print Jet-Out Lines — prints a version of the prime bars (see

page 2-6), in which missing jets that are replaced are

marked with a black square.

◆ Fill Service Station — fills the service station reservoir with

cleaning solvent.

◆ Reset Reservoir Filters — after you replace the ink reservoir

filters, select this option to reset the ink counts to zero. See

“Replace Ink Filters” on page 5-19 for instructions.

◆ Respool Media — this option enables you to respool media

from the supply directly to the takeup (in either direction)

without passing over the heaters or platen.

◆ Clean Grit Rollers — advances the grit rollers continuously so

they can be cleaned (with no media loaded).

◆ Capping Purge — enables you to disable or enable the purge

that is automatically performed prior to capping.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 167 168

No comments

HP 72SI User Manual Page 44