HP 72SI User Manual download pdf (Page 63)

Capping the Printheads 3-15

6. Wipe the printheads with SolaChrome-HR Cleaning Solvent,

using a 100% polyester Class 100 cleanroom wipe. DO NOT

USE ISOPROPYL ALCOHOL ON THE PRINTHEADS.

Remove ink buildup on the printheads and lower surfaces of

the carriage.

7. Replace the capping station assembly by aligning it with and

pushing it into its tracks in the printer.

The capping station assembly is “keyed” so that it can be

inserted all the way in the correct orientation. If you cannot

push the capping station all the way into place, turn it

around and try installing it again.

8. Press the

! (Proceed) key.

The printhead carriage moves quickly to the right end of the

printer, to the service station.

9. Press the

! (Proceed) key.

The control panel displays the Front Page screen.

10. Print the prime bars.

See “Print Prime Bars” on page 3-8 for instructions. After the

printheads have been capped, the prime bars will reveal sev-

eral missing jets.

11. Purge the printheads.

See “Purge-n-Wipe Printheads” on page 3-8 for instructions.

12. Repeat steps 10 through 13 until no unreplaced missing jets

are revealed by the prime bars.

13. Run AutoJet or Manual Jet Mapping.

See page 3-9 for instructions.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 167 168

No comments

HP 72SI User Manual Page 63