HP 72SI User Manual download pdf (Page 88)

3-40 Edge-to-Edge Printing

◆ Under Menu > Printer Settings > Media Measure Type,

choose Maximal for greatest precision and skew detection

when printing edge-to-edge. It measures the width of the

media in two places, and finds the front edge in two places

to estimate skew and detect non-rectangular sheets. The

printer will report if the media appears to be skewed and

therefore will not feed straight through the print zone. If the

media is not actually skewed, one or more of its edges may

not be parallel to each other.

Loading and Squaring the

Media

◆ Load the media as described in “Loading Rigid Media,”

earlier in this chapter.

◆ If the printer discovers that the media is skewed, you can

reposition most media without releasing the pinch rollers by

nudging the trailing edge right or left to correct the skew.

Fig. 3-21. Skewed (left) and non-square (right) sheets

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 167 168

No comments

HP 72SI User Manual Page 88