HP 72SI User Manual download pdf (Page 24)

1-12 Parts Overview

11 Pinch rollers — grip the media during loading and

printing.

12 Pinch roller adjustment lever — allows you to adjust

the force or release the pinch rollers to feed rigid cut-

sheet media.

13 Rigid media sensor — detects whether rigid media is

loaded.

14 Capping station — protects the printheads from drying

out while idle (not printing) for extended periods.

15 H a ndl e — for pulling the printer on its casters and lift-

ing the end of the printer.

16 S ta nd — supports the printer.

17 Casters (four places) — enables easy relocation of the

printer, can be locked in place.

18 Leveling pads (four places) — allows the printer to be

stabilized and leveled for consistent media feeding.

19 Docking station — holds the profilers, one for each ink

box, that track ink and cleaning solvent usage, and

identify ink characteristics for the RIP.

20 Off-Head System (OHS) — ink boxes, electronics, vac-

uum (to maintain negative head pressure), and pres-

sure (for purging the printheads) that provide ink and

cleaning solvent for cleaning the printheads.

21 Ink filters — user replaceable, one for each ink supply;

filters out impurities from the ink or cleaning solvent

prior to being sent to the printheads.

22 Ink boxes — each box holds 3 liters of ink or solvent

cleaning solution.

23 Power connection — inlet connects the printer to elec-

trical power. Power outlet provides power to the

optional auxiliary dryer.

24 Standby power switch — places printer in standby

mode (to disconnect from power, remove the power

cord).

25 VideoNet port — connects printer to print server.

26 Vacuum/Pressure (VP) assembly — provides vacuum

and pressure to the OHS and printheads.

Index Description

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 167 168

No comments

HP 72SI User Manual Page 24