Hp 3000dtn User Manual download pdf (Page 85)

ENWW 6-19

Printing on heavy media

When printing on heavy media (up to 0.52 mm or 0.02 inch thick), use

Tray 1. It provides a straight-through paper path that allows the printer

to handle heavy or thick media without bending or curling the media.

CAUTION Do not use media that is heavier than the media specification

recommended for this printer. Doing so can cause misfeeds, jams,

reduced print quality, and excessive mechanical wear.

See “Selecting and loading print media.”

To print on heavy media using Tray 1

1 In the printer driver, select Manual Feed as the media source,

select the appropriate media type, and then print the document.

For more information about configuring settings in the printer driver,

see “Using the printer driver.”

2 When the LCD control panel displays

MANUALLY LOAD [TYPE]

[SIZE]

, insert one sheet of media into Tray 1. Make sure the sheet

is facing up and is against the left edge of the tray.

For more information, see “Loading Tray 1.”

3 If you are printing more than one page, insert another sheet of

media when prompted by the LCD control panel.

To print on heavy media using the optional

multipurpose tray

Note The optional multipurpose tray is installed in the Tray 1 location.

1 Load the media face-up in the tray. Position the media against the

right edge of the tray, and then slide the media down into the tray.

For more information, see “To load media in the optional

multipurpose tray.”

2 In the printer driver, select Tray 1 as the media source, and then

select the appropriate media type.

3 Print the document.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 197 198

No comments

Hp 3000dtn User Manual Page 85