Hp 3000dtn User Manual download pdf (Page 37)

ENWW 3-5

Step 1: Install the HP Jetdirect print server

CAUTION The HP Jetdirect print server contains electronic components that

can be damaged by static electricity. To prevent buildup of static

electricity, maintain frequent contact with any bare sheet metal

surface on the printer. If possible, wear a grounding wrist strap

(or similar device). Handle the print server carefully at all times.

Avoid touching electronic components or circuit paths.

1 Press and hold (power button) to turn off the printer, and then

unplug the power cord.

2 Use a Phillips head screwdriver to loosen and remove the two

retaining screws holding the cover for the empty EIO slot onto the

printer. Remove the cover. You will not need these screws and

cover again.

3 Firmly insert the HP Jetdirect print server into the EIO slot.

4 Insert and tighten the retaining screws that came with the

HP Jetdirect print server.

5 Connect the network cable to the HP Jetdirect print server.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 197 198

No comments

Hp 3000dtn User Manual Page 37