Hp 3000dtn User Manual download pdf (Page 73)

ENWW 6-7

z Do not use paper that is heavily textured or does not accept ink

well. This type of paper can cause poorly filled graphics or text.

z The document margins must match or exceed a margin setting of

4 mm (0.13 inch).

Configuring trays

When you print a document, you can allow the printer to select the tray

for the print job, or you can select a specific tray in the printer driver for

the print job. These settings are available in the Source drop-down

menu in Windows printer drivers and the All pages from pop-up menu

in the Mac OS printer driver.

If you do not select a tray in the printer driver, the printer automatically

selects a tray based on the media sizes configured in the printer—either

in the LCD control panel for Tray 1 or by the length and width guides in

Tray 2 or Tray 3. If neither the media type nor the media size settings

have been changed from the default settings, the printer draws A4/letter

from Tray 1. For Tray 2 and Tray 3, the printer looks for the default type,

and uses the media width and media length guide settings to determine

the media size.

For information about configuring media sizes and types for trays, see

“To set media size and type in the LCD control panel.”

Loading Tray 1

Use Tray 1 for printing envelopes, cards, custom size media, and heavy

media up to 0.52 mm (0.02 inch) thick. Tray 1 provides a

straight-through paper path that allows the printer to handle heavy or

thick media. A straight-through paper path does not force the media to

curve or bend as it travels through the printer.

Note If you have purchased the optional multipurpose tray, remove the

single sheet feed unit from the Tray 1 location and install the

multipurpose tray. To use the multipurpose tray, see “To load media

in the optional multipurpose tray“ or “To print on envelopes and

cards using the optional multipurpose tray” for more information.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 197 198

No comments

Hp 3000dtn User Manual Page 73