Hp 3000dtn User Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 198
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
ENWW 2-5
WARNING! Be careful to keep your fingers and hands clear of the bottom of
the printer.
5 Remove the tape and packing materials from the printer.
Step 2: Connect the power cord and turn on
the printer
1 Connect the power cord to the printer and an alternating current
(AC) power receptacle.
2 Press (power button) on the LCD control panel to turn on
the printer.
For a description of LCD control panel buttons, see Understanding
the LCD control panel.
WARNING! To prevent electric shock, connect the power cord to a grounded
power receptacle only. Use only the power cord included with the
printer.
Step 3: Set up the LCD control panel for your
language (optional)
When the printer is turned on for the first time, you have the option to
set the language for the LCD control panel messages.
To select the LCD control panel language
1 Press (select button) on the LCD control panel.
2 Press (down arrow button) to highlight
CONFIGURE DEVICE, and
then press (select button)
.
3 Press (down arrow button) to highlight SYSTEM SETUP, and then
press (select button).
4 Press (down arrow button) to highlight
LANGUAGE, and then
press (select button).
5 Press (down arrow button) or (up arrow button) to scroll
through the language list and highlight the language of your choice.
6 Press (select button) to confirm the language selection.
7 Press (pause/resume button) to return the printer to the
READY state.
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 197 198

Comments to this Manuals

No comments