HP EliteBook 8570w Specifications download pdf (Page 95)

VGA port board

Description Spare part number

VGA port board 690641-001

Before removing the VGA port board, follow these steps:

IMPORTANT: Make special note of each screw and screw lock size and location during removal

and replacement.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet,

and then unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 46).

Remove the service door (see

Service door on page 52).

Remove the following components:

Hard drive (see

Hard drive on page 63).

Upgrade bay device (see

Upgrade bay device on page 68).

Keyboard (see

Keyboard on page 72).

Top cover (see

Top cover on page 76).

Remove the VGA port board:

Position the computer right-side up with the front toward you.

Remove the Phillips screw (1) that secures the VGA port board to the base enclosure.

Remove the two Torx 8 screws (2) that secure the VGA port board to the base enclosure.

Component replacement procedures

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 166 167

No comments

HP EliteBook 8570w Specifications Page 95