HP EliteBook 8570w Specifications Page 125

  • Download
  • Add to my manuals
  • Print
  • Page
    / 167
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 124
Battery latch
NOTE: The battery latch is included with the battery latch kit , spare part number 690633-001.
Before removing the battery latch, follow these steps:
IMPORTANT: Make special note of each screw and screw lock size and location during removal
and replacement.
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 46).
5.
Remove the service door (see
Service door on page 52).
6.
Remove the following components:
a.
Hard drive (see
Hard drive on page 63).
b.
Upgrade bay device (see
Upgrade bay device on page 68).
c.
Keyboard (see
Keyboard on page 72).
d.
Top cover (see
Top cover on page 76).
e.
Fan and heat sink assembly (see
Fan and heat sink assembly on page 89).
f.
Audio/USB 3.0 board (see
Audio/USB 3.0 board on page 95).
g.
Speakers (see
Speakers on page 99).
h.
ExpressCard/USB 2.0 assembly (see
ExpressCard/USB 2.0 assembly on page 102).
i.
System board (see
System board on page 106).
j.
RJ-11 connector cable (see
RJ-11 connector cable on page 113).
k.
Service door latch (see
Service door latch on page 115).
Remove the battery latch:
1.
Position the computer right-side up with the front toward you.
CAUTION: Ensure that the spring (1) remains intact while removing the battery latch.
2.
Remove the two Phillips screws (2) that secure the battery latch to the base enclosure.
Component replacement procedures
117
Page view 124
1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 166 167

Comments to this Manuals

No comments