HP EliteBook 8570w Specifications download pdf (Page 123)

Service door latch

NOTE: The service door latch is included with the battery latch kit , spare part number 690633-001.

Before removing the service door latch, follow these steps:

IMPORTANT: Make special note of each screw and screw lock size and location during removal

and replacement.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet,

and then unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 46).

Remove the service door (see

Service door on page 52).

Remove the following components:

Hard drive (see

Hard drive on page 63).

Upgrade bay device (see

Upgrade bay device on page 68).

Keyboard (see

Keyboard on page 72).

Top cover (see

Top cover on page 76).

Fan and heat sink assembly (see

Fan and heat sink assembly on page 89).

Audio/USB 3.0 board (see

Audio/USB 3.0 board on page 95).

Speakers (see

Speakers on page 99).

ExpressCard/USB 2.0 assembly (see

ExpressCard/USB 2.0 assembly on page 102).

System board (see

System board on page 106).

RJ-11 connector cable (see

RJ-11 connector cable on page 113).

Remove the service door latch:

Position the computer right-side up with the front toward you.

Remove the three Phillips screws (1) that secure the service door latch to the base enclosure.

Component replacement procedures

115

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 166 167

No comments

HP EliteBook 8570w Specifications Page 123