HP EliteBook 8570w Specifications download pdf (Page 119)

Power connector cable

NOTE: The power connector cable is included in the cable kit, spare part number 690623-001.

Before removing the power connector cable, follow these steps:

IMPORTANT: Make special note of each screw and screw lock size and location during removal

and replacement.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet,

and then unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 46).

Remove the service door (see

Service door on page 52).

Remove the following components:

Hard drive (see

Hard drive on page 63).

Upgrade bay device (see

Upgrade bay device on page 68).

Keyboard (see

Keyboard on page 72).

Top cover (see

Top cover on page 76).

Fan and heat sink assembly (see

Fan and heat sink assembly on page 89).

Audio/USB 3.0 board (see

Audio/USB 3.0 board on page 95).

Speakers (see

Speakers on page 99).

ExpressCard/USB 2.0 assembly (see

ExpressCard/USB 2.0 assembly on page 102).

System board (see

System board on page 106).

Remove the power connector cable:

Position the computer right-side up, with the front toward you.

Remove the tape (1) from the top of the power connector cable.

Lift the power connector cable (2) up from the routing in the rear of the base enclosure.

Component replacement procedures

111

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 166 167

No comments

HP EliteBook 8570w Specifications Page 119