HP EliteBook 8570w Specifications download pdf (Page 110)

ExpressCard/USB 2.0 assembly

Description Spare part number

ExpressCard/USB 2.0 assembly 652680-001

Before removing the ExpressCard/USB 2.0 assembly, follow these steps:

IMPORTANT: Make special note of each screw and screw lock size and location during removal

and replacement.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet,

and then unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 46).

Remove the service door (see

Service door on page 52).

Remove the following components:

Hard drive (see

Hard drive on page 63).

Upgrade bay device (see

Upgrade bay device on page 68).

Keyboard (see

Keyboard on page 72).

Top cover (see

Top cover on page 76).

Fan and heat sink assembly (see

Fan and heat sink assembly on page 89).

Processor (see

Processor on page 93).

Modem module (see

Modem module on page 97).

Audio/USB 3.0 board (see

Audio/USB 3.0 board on page 95).

Speakers (see

Speakers on page 99).

Remove the ExpressCard/USB 2.0 assembly:

Position the computer right-side up, with the front toward you.

Remove the SD and CFast slot protective inserts (1).

Remove the three Torx 8 screws (2) that secure the assembly to the system board.

102 Chapter 4 Removal and replacement procedures

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 166 167

No comments

HP EliteBook 8570w Specifications Page 110