HP EliteDesk 800 65W G3 Desktop Mini PC User Manual Page 107
- Page / 139
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Control panel message Description Recommended action
00E-Inventory Error during MEBx Execution BIOS information passed to the MEBx resulted
in a failure.
1. Reboot the computer.
2. If the error persists, update to the latest
BIOS version.
3. If the error still persists, replace the
system board.
00F-Interface Error during MEBx Execution MEBx operation experienced a hardware error
during communication with the ME.
1. Reboot the computer.
2. If the error persists, update to the latest
BIOS version.
3. If the error still persists, replace the
system board.
100-Front Audio Not Connected Front audio cable has been detached or
unseated from system board.
Reconnect or replace front audio cable.
2E1-MemorySize Error Memory amount has changed since the last
boot (memory added or removed).
The system memory size is dierent from the
last startup. The most common reason is the
removal of memory from the system board.
Press the F1 key to save the memory changes.
If this message persists, verify that the
memory modules are installed correctly.
2E2-Memory Error Memory module conguration failed during
boot up.
1. Ensure memory modules are correctly
installed.
2. Verify proper memory module type.
3. Remove and replace the identied faulty
memory module(s).
4. If the error persists after replacing
memory modules, replace the system
board.
2E3-Incompatible Memory Module in Memory
Socket(s) X, X, ...
A memory module in memory socket identied
in the error message is missing critical SPD
information, or is incompatible with the chipset.
1. Verify proper memory module type.
2. Try another memory socket.
3. Replace with a supported module.
2E4-DIMM Conguration Warning The current memory conguration is not
optimized.
Rearrange the DIMMs so that each channel has
the same amount of memory.
2E5-ECC Memory Module Detected on
Unsupported Platform
Recently added memory module(s) support ECC
memory error correction.
1. If additional memory was recently added,
remove it to see if the problem remains.
2. Check product documentation for
memory support information.
2E6–Memory Not Congured Correctly for
Proper MEBx Execution
DIMM1 is not installed. Make sure there is a memory module in the
DIMM1 socket and that it is properly seated.
300–Conguration Change Warning A change in storage conguration has been
detected (see Boot Options menu in BIOS Setup
to enable this feature). Either the installed
hardware has changed, storage or rmware
mode may have been changed, or a storage
device may have failed to respond.
If no changes have been made prior to this
warning, check that the drives are connected
properly to power cables and system board.
User Diagnostics (F2 during boot-up) may help
identify any problem with specic devices.
301-Hard Disk 1: SMART Hard Drive Detects
Imminent Failure
Hard drive is about to fail. (Some hard drives
have a hard drive rmware patch that will x an
erroneous error message.)
1. Determine if hard drive is giving correct
error message. Run the Drive Protection
System test under using F2 Diagnostics
when booting the computer.
POST numeric codes and text messages 99
- Maintenance and Service Guide 1
- Safety warning notice 3
- Table of contents 5
- 1 Product features 9
- Serial number location 13
- 2 Illustrated parts catalog 14
- Misc parts 17
- Generating static 20
- Grounding the work area 21
- Operating guidelines 22
- Routine care 23
- Service considerations 24
- Cables and connectors 25
- Hard Drives 25
- Lithium coin cell battery 25
- SATA hard drives 26
- SATA hard drive cables 26
- SMART ATA drives 26
- Cable management 27
- Preparation for disassembly 28
- Top cover 29
- Front bezel 30
- Front bezel dust lter 31
- Thermal sensor 32
- SODIMM specications 33
- Populating SODIMM sockets 34
- Replacing SODIMMs 35
- Hard drive 37
- Hard drive cable 39
- Drive cage 41
- WLAN module 44
- WLAN module 37 45
- External antenna 46
- External antenna 39 47
- RTC battery 48
- Heat sink 51
- Heat sink 45 53
- Processor 54
- Option board 57
- System board 58
- System board callouts 60
- Computer Setup–Main 67
- Computer Setup—Security 69
- Computer Setup—Advanced 71
- Computer Setup—UEFI Drivers 76
- Safety and comfort 77
- Helpful hints 78
- Solving general problems 79
- Solving general problems 73 81
- Solving power problems 83
- Solving hard drive problems 84
- Solving display problems 87
- Solving display problems 81 89
- Solving audio problems 91
- Solving printer problems 93
- Solving network problems 97
- Solving network problems 91 99
- Solving memory problems 100
- Solving software problems 104
- Resetting the password jumper 112
- 10 System backup and recovery 117
- Backing up your information 119
- System Restore 120
- System Recovery 120
- Restore and recovery 125
- Using Windows tools 125
- A Power Cord Set Requirements 128
- Country-Specic Requirements 129
- Nonvolatile memory usage 132
- Nonvolatile memory usage 125 133
- Questions and answers 134
- C Specications 136
Related products and manuals for Laptops HP EliteDesk 800 65W G3 Desktop Mini PC
Laptops HP OMEN - 17-w200 CTO User Manual
(101 pages)
(101 pages)
Laptops HP Classmate Notebook PC User Manual
(75 pages)
(75 pages)
Laptops HP 512424-001 Technical Information
(154 pages)
(154 pages)
Laptops HP Pro Tablet 608 G1 User Manual
(62 pages)
(62 pages)
Laptops HP Pro Tablet 10 EE G1 User Manual
(45 pages)
(45 pages)
Laptops HP EliteBook 2760p Tablet PC User Manual
(105 pages)
(105 pages)
(117 pages)© 2020, manymanuals.com. All rights reserved. | 0.353 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals