HP EliteDesk 800 65W G3 Desktop Mini PC User Manual download pdf (Page 46)

External antenna

The antennas route from the WLAN module to the cable connectors on the rear of the computer.

To install the antennas:

1. Prepare the computer for disassembly (Preparation for disassembly on page 20).

2. Remove the top cover (Top cover on page 21).

3. Remove the hard drive (Hard drive on page 29).

4. If your model is an EliteDesk 800 G3, remove the secondary fan (Secondary fan (EliteDesk 800 G3 65 W

models only) on page 32).

5. Remove the drive cage (Drive cage on page 33).

6. Locate the WLAN module on the system board.

7. Disconnect the internal antennae from the WLAN module.

For instructions, see WLAN module on page 36.

8. Locate both external antenna positions on the rear of the chassis.

9. To view the knock-out feature on the left side of the rear panel, remove the antenna cover by pushing

down on the antenna cover (1) and pulling it away (2) from the panel.

38 Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 138 139

No comments

HP EliteDesk 800 65W G3 Desktop Mini PC User Manual Page 46