HP EliteDesk 800 65W G3 Desktop Mini PC User Manual download pdf (Page 58)

System board

NOTE: All system board spare part kits include replacement thermal material.

NOTE: System board appearance may vary.

1. Prepare the computer for disassembly (Preparation for disassembly on page 20).

2. Remove the top cover (Top cover on page 21).

3. Remove the thermal sensor (Thermal sensor on page 24).

4. Remove the memory modules (Memory on page 25).

5. Remove the hard drive (Hard drive on page 29).

6. Remove the hard drive cable (Hard drive cable on page 31).

7. If your model is an EliteDesk 800 G3, remove the secondary fan (Secondary fan (EliteDesk 800 G3 65 W

models only) on page 32).

8. Remove the drive cage (Drive cage on page 33).

9. Remove the fan (Fan on page 42).

10. Remove the heat sink (Heat sink on page 43).

11. Remove the solid-state drive (if installed) (M.2 PCIe solid state drive (SSD) on page 34).

12. Remove the WLAN module (if installed) (WLAN module on page 36).

13. Remove the option board (if installed) (Option board on page 49).

14. Remove the three Torx screws (1) that secure the system board to the computer.

15. Lift the system board out of the computer (2).

50 Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 138 139

No comments

HP EliteDesk 800 65W G3 Desktop Mini PC User Manual Page 58