HP EliteDesk 800 65W G3 Desktop Mini PC User Manual download pdf (Page 56)

Speaker

A single speaker is located on the left side of the computer behind the front bezel, inside the chassis. It is

secured by one Torx screw on the outside and tape on the inside.

To remove the speaker:

1. Prepare the computer for disassembly (Preparation for disassembly on page 20).

2. Remove the top cover (Top cover on page 21).

3. Remove the hard drive (Hard drive on page 29).

4. Remove the hard drive cage (Drive cage on page 33).

5. From the front of the computer, remove the Torx screw that secures the speaker (1).

6. Disconnect the speaker cable from the system board connector (2).

7. From the inside of the computer, lift to remove the tape from the speaker (1), and then slide the speaker

toward the left to remove it from the computer (2).

To install the speaker, reverse the removal procedures.

48 Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 138 139

No comments

HP EliteDesk 800 65W G3 Desktop Mini PC User Manual Page 56