HP EliteDesk 800 65W G3 Desktop Mini PC User Manual download pdf (Page 44)

WLAN module

Description

Intel 8265 802.11AC 2x2 Wi-Fi +Bluetooth M.2 Combo Card non-VPro

Intel 7265 802.11AC 2x2 Wi-Fi +Bluetooth M.2 Combo Card non-VPro

Intel 3168 802.11AC 2x2 Wi-Fi +Bluetooth M.2 Combo Card non-VPro

The WLAN module is secured with one Phillips screw and has two connected antennas. It is located under the

hard drive cage.

1. Prepare the computer for disassembly (Preparation for disassembly on page 20).

2. Remove the top cover (Top cover on page 21).

3. Remove the hard drive (Hard drive on page 29).

4. If your model is an EliteDesk 800 G3, remove the secondary fan (Secondary fan (EliteDesk 800 G3 65 W

models only) on page 32).

5. Remove the drive cage (Drive cage on page 33).

6. Locate the WLAN module on the system board.

7. Disconnect both antenna cables (1) from the WLAN module.

NOTE: You may need to use a small tool, such as a pair of tweezers or needle-nose pliers, to

disconnect and connect the antenna cables.

8. Remove the screw (2) that secures the WLAN module to the system board.

36 Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 138 139

No comments

HP EliteDesk 800 65W G3 Desktop Mini PC User Manual Page 44