HP DL120 - ProLiant - G5 Troubleshooting Guide Page 175

  • Download
  • Add to my manuals
  • Print
  • Page
    / 201
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 174
Error messages 175
CAUTION: Only authorized technicians trained by HP should attempt to remove the system
board. If you believe the system board requires replacement, contact HP Technical Support
("Contacting HP" on page 185, "Contacting HP technical support or an authorized reseller" on
page 185) before proceeding.
Action: Replace the board on which the processor is installed.
Uncorrectable Memory Error (Slot X, Memory Module Y)...
...Uncorrectable Memory Error (System Memory)
Uncorrectable Memory Error (Memory Module Unknown)
Event Type: Uncorrectable error
Action: Replace the memory module. If the problem persists, replace the memory board.
HP BladeSystem p-Class infrastructure error codes
The server blade management modules and power management modules contain service ports that enable
service personnel to gather fault information.
To gather the fault information:
1. Connect to the service port. For more information, refer to the HP BladeSystem Maintenance and
Service Guide on the HP website (http://www.hp.com/products/servers/proliant-bl/p-class/info).
2. Access the diagnostics. For more information, refer to the HP BladeSystem Maintenance and Service
Guide on the HP website (http://www.hp.com/products/servers/proliant-bl/p-class/info).
Server blade management module error codes
Server blade error codes
Location LED codes
Server Blade - Slot 1
1-1 or 1-2
Server Blade - Slot 2
2-1 or 2-2
Server Blade - Slot 3
3-1 or 3-2
Server Blade - Slot 4
4-1 or 4-2
Server Blade - Slot 5
5-1 or 5-2
Server Blade - Slot 6
6-1 or 6-2
Server Blade - Slot 7
7-1 or 7-2
Server Blade - Slot 8
8-1 or 8-2
Action: Perform the following steps to resolve the problem. Stop when the problem is resolved.
1. Reseat the server.
Refer to server documentation on the HP website
(http://www.hp.com/products/servers/proliant-bl/p-class/info).
Server blade management module board error codes
LED code: 9-1, 9-2, 9-3, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9, 9-10, 9-11, or 9-12
Page view 174
1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 200 201

Comments to this Manuals

No comments