HP DL120 - ProLiant - G5 Troubleshooting Guide Page 125

  • Download
  • Add to my manuals
  • Print
  • Page
    / 201
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 124
Error messages 125
Internal CPU Check - Processor
Audible Beeps: None
Possible Cause: A processor has experienced an internal error.
Action:
1. Run Insight Diagnostics ("HP Insight Diagnostics" on page 75).
CAUTION: Before removing or replacing any processors, be sure to follow the guidelines
provided in "Performing processor procedures in the troubleshooting process (on page 16)."
Failure to follow the recommended guidelines can cause damage to the system board, requiring
replacement of the system board.
2. Replace any failed components as indicated, including processors and PPMs.
Invalid memory types were found on the same node. Please check DIMM
compatibility. - Some DIMMs may not be used
Description: Invalid or mixed memory types were detected during POST.
Action: Use only supported DIMM pairs when populating memory sockets. Refer to the applicable server user
guide memory requirements.
Invalid Password - System Halted!
Audible Beeps: None
Possible Cause: An invalid password was entered.
Action: Enter a valid password to access the system.
Invalid Password - System Restricted!
Audible Beeps: None
Possible Cause: A valid password that does not have permissions to access the system has been entered.
Action: Enter a valid password with the correct permissions.
Memory found on unpopulated Node. Processor is required to be installed for
memory to be used.
Description: The system detects DIMMs, but is unable to use the DIMMs because a processor is not installed
in the corresponding socket.
Action:
CAUTION: Before installing any processors, be sure to follow the guidelines provided in
"Performing processor procedures in the troubleshooting process (on page 16)." Failure to follow
the recommended guidelines can cause damage to the system board requiring replacement of the
system board.
To use the installed DIMMs, install a processor in the corresponding socket.
Page view 124
1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 200 201

Comments to this Manuals

No comments