Hp LaserJet 4050 Printer series User Manual download pdf (Page 228)

C-4 Printer Memory and Expansion

5 Remove the DIMM from the antistatic

package. Hold the DIMM with fingers

against the side edges and thumbs

against the back edge. Align the

notches on the DIMM with the DIMM

slot. (Check that the locks on each

side of the DIMM slot are open, or

outward.)

6 Press the DIMM straight into the slot

(press firmly). Make sure the locks on

each side of the DIMM snap inward

into place. (To remove a DIMM, the

locks must be released.)

7 Close the DIMM access door and

tighten the screw

8 Set the bottom of the cover onto the

printer. Make sure the bottom tabs on

the cover fit into the corresponding

slots in the printer. Rotate the cover

up towards the printer.

9 Slide the cover toward the front of the

printer until it clicks into place.

Reattach any interface cables and

the power cord, then turn the printer

on and test the DIMM. (Go to

page C-5.)

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 259 260

No comments

Hp LaserJet 4050 Printer series User Manual Page 228