Hp LaserJet 4050 Printer series User Manual Page 128

  • Download
  • Add to my manuals
  • Print
  • Page
    / 260
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 127
106 Chapter 4: Problem Solving
EN
INPUT DEVICE
CONDITION xx.yy
An input paper handling device has a condition that needs attention
before printing can resume.
See the documentation that came with the paper handling device for
assistance.
INSTALL TONER
CARTRIDGE
The toner cartridge has been removed and must be replaced for
printing to continue.
INSTALL TRAY X
The specified tray is not installed and must be inserted and closed
for printing to continue.
LOADING
PROGRAM <number>
alternates with
DO NOT POWER OFF
Programs and fonts can be stored on the printer’s file system. At
bootup time these entities are loaded into RAM. (These entities can
take a long time to load into RAM depending on the size and number
of entities being loaded.) The
<number>
specifies a sequence
number indicating the current program being loaded.
MANUALLY FEED
[TYPE] [SIZE]
Load the requested paper into Tray 1.
Press [Go] if the desired paper is already loaded in Tray 1.
MEMORY FULL
STORED DATA LOST
There is no available memory in the printer. The current job might not
print correctly and some resources (such as downloaded fonts or
macros) might have been deleted.
You might want to add more memory to the printer (page C-1).
MEMORY SETTINGS
CHANGED
The printer changed its memory settings because it did not have
enough memory to use the previous settings for I/O Buffering and
Resource Saving. This usually occurs after removing memory from
the printer, adding a duplexer, or adding a printer language.
You might want to change memory settings for I/O Buffering and
Resource Saving (although default settings are usually best) or add
more memory to the printer (page C-1).
MEMORY SHORTAGE
JOB CLEARED
The printer did not have enough free memory to print the entire job.
The remainder of the job will not print and will be cleared from
memory.
Press [Go] to continue.
Change the Resource Save setting from the printer’s control panel
(page B-14) or add more memory to the printer (page C-1).
MEMORY SHORTAGE
PAGE SIMPLIFIED
The printer had to compress the job in order to fit it in available
memory. Some data loss might have occurred.
Press [Go] to continue.
The print quality of these pages may not be acceptable. Reduce the
complexity of these pages and reprint them.
You might want to add more memory to the printer (page C-1).
OFFLINE
Press [Go] to place the printer online.
Printer Messages (Continued)
Message Explanation or Recommended Action
Page view 127
1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 259 260

Comments to this Manuals

No comments