Hp LaserJet 4050 Printer series User Manual download pdf (Page 97)

Chapter 2: Printing Tasks 75

Printing with the Optional HP Fast

InfraRed Receiver

The HP Fast InfraRed Receiver enables wireless printing from any

IRDA-compliant portable device (such as a laptop computer) to the

HP LaserJet 4050, 4050 N, 4050 T, or 4050 TN printer.

The printing connection is maintained by positioning the sending

infrared (FIR) port within operating range. Note that the connection

can be blocked by objects such as a hand, paper, direct sunlight, or

any bright light shining into either FIR port.

Note For more information, see the user guide that came with the HP Fast

InfraRed Receiver.

Setting Up to Print with Windows 9x

Before launching the InfraRed Driver, complete the following steps:

1 From the Printers folder, select the HP LaserJet 4050, 4050 N,

4050 T, or 4050 DN as your default printer.

2 While in the same Printers folder, choose Properties/Details,

and make sure that Virtual Infrared LPT Port is selected.

3 Select the file to print.

Printing a Job

1 Align your laptop computer (or other portable device equipped

with an IRDA-compliant FIR window) within 2 to 3 feet (1 meter)

maximum of the HP Fast InfraRed Receiver. The FIR window

must be at an angle of +/- 15 degrees to ensure an effective

connection for printing.

2 Print the job. The status indicator on the HP Fast InfraRed

Receiver lights up, and, after a short delay, the printer status

panel displays

PROCESSING JOB

If the status indicator does not light up, realign the HP Fast InfraRed

Receiver with the FIR port on the sending device, resend the print

job, and maintain the alignment of all devices. If you have to move

the equipment (for example, to add paper), make sure that all

devices remain within the range of operation to maintain the

connection.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 259 260

No comments

Hp LaserJet 4050 Printer series User Manual Page 97