Hp LaserJet 4050 Printer series User Manual download pdf (Page 193)

Specifications A-13

Envelope Margins

The following table gives typical address margins for a Commercial

#10 or DL envelope.

Note For the best print quality, position margins no closer than 0.6 inch

(15 millimeters) from the edges of the envelope.

Envelope Storage

Proper storage of envelopes helps contribute to good print quality.

Envelopes should be stored flat. If air is trapped in an envelope,

creating an air bubble, then the envelope may wrinkle during

printing.

Card Stock and Heavy Paper

Many types of card stock can be printed from Tray 1, including index

cards and postcards. Some card stock performs better than others

because its construction is better suited for feeding through a laser

printer.

For optimum printer performance, do not use paper heavier than

53 lb (199 g/m

) in Tray 1 or 28 lb (105 g/m

) in other trays. Paper

that is too heavy might cause misfeeds, stacking problems, paper

jams, poor toner fusing, poor print quality, or excessive mechanical

wear.

Note Printing on heavier paper may be possible if the tray is not filled to

capacity, and paper with a smoothness rating of 100-180 Sheffield

is used.

Type of Address Top Margin Left Margin

Return Address 0.6 in (15 mm) 0.6 in (15 mm)

Delivery Address 2 in (51 mm) 3.5 in (89 mm)

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 259 260

No comments

Hp LaserJet 4050 Printer series User Manual Page 193